新闻详情
How to judge whether the electric hoist is up to standard?
1. The hoisting chain should be equipped with a guide device to assist the normal meshing of the chain with the hoisting sprocket and the cruise ship. The unstressed end of the hoisting chain should be provided with a device to prevent the hoisting chain from overwinding and detaching from the hoisting sprocket. restrictive device.
2. The rated lifting capacity of the electric chain hoist should be marked on the prominent position of the lower hook, and there should be a locking device to prevent the rigging from slipping accidentally. The lower hook should be able to rotate 360 degrees and turn flexibly.
3. The metal of the motor winding should be able to withstand the withstand voltage test for 1 minute without insulation breakdown.
4. For motors with rated power not greater than 1.1KW, the leakage current during the test should not exceed 10 mA, and for motors with rated power greater than 1.1KW, the leakage current during the test should not exceed 20 mA.
5. The mechanical performance test of the hook should comply with the national regulations, and the lifting chain should not be lower than the requirements of GB\/T10051.1.
Previous: No Information
下一条: Have you done the right steps to repair the electromagnetic chuck?
Related News
- Crossover lifting platform self-protection knowledge
- Performance characteristics and precautions of elevators
- How to improve the cantilever crane cargo and safety practices
- Electric ring chain hoist lifting height h meaning
- Introduction to the relevant knowledge of explosion-proof electric hoist
- Balance hanging features of the four major functions
- Four problems needing attention in the early stage of lifting freight elevator
- Explosion - proof electric hoist explosion point analysis
- Electric flat car orbit installation process
- Hydraulic rail freight elevator product features